So I thought I'd use the WRT54G as a second router/AP (without wireless/LAN/WAN). We just got cable internet the other day and the cable operator insisted on using their v1000 Belkin F5D7234-4 instead of my WRT54G V8. I really appreciate if someone could provide a step by step to configure the appropriate network and be able to reach my IP - PBX on the second language of anywhere.Īdd WRT54G: second router / access point, unable to get to the outside network. I am confused to use and combine different settings (NAT, routing, Ports.) When the router is selected, dynamic routing is enabled'Īlso I am able to ping the LAN 192.168.0.x WRV210 first but not on the other side (from primary router WRV210). If another router exists on your network, select route. If this router is hosted your connection of networks to the Internet, select gateway. I learned a lot during the last 7 days can understand the concepts of network management, but was unable to put in place the appropriate configuration.įor example if I change WRV210 router mode gateway mode, I won't be able to surf the internet despite the assistance that says "the mode in which this router will work. I need to configure VPN on WRV210 to be able to get SIP calls outside the local network (via internet).Īs I am a novice in networks, both routers are the DEFAULT setting. I also have a Panasonic IP/PBX connected on the second language (WRV210) In this way, I'm able to get the Internet on 2 laptops connected to WRV210 The cable connection is LAN port of the first router to second router Internet port. The main router has the following parameters of LAN: 192.168.0.1 / 255.255.255.0 with active DHCP. I'm trying to set up a network containing two routers, a primary giving me access to internet ADSL (a 3CRWDR101A-75 3com) and a secondary router which has VPN (Cisco WRV210).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |